产品中心
产品中心
派路特 HFD 46
来源于:张家港保税区澳博国际贸易有限公司

简 介
派路特HFD 46是高性能的抗燃液压油,专为涡轮机上的电液控制系统而设。这是由精选的二甲苯酚所馏出的三芸基磷酸酯精炼而成,提供极佳的抗氧化稳定性。
用 途
派路特HFD 46是专为涡轮机调速器系统,包括使用精密伺服阀的系统而设。亦适用於蒸汽和燃汽轮机作为抗燃润滑油及其它需要用抗燃液压油的液压系统,例如:铸造、锻造用锤、熔炉及其它有火警危险的工作。
优 点
·全面获得西门子TLV 9012 02 (03/97)批准,在电液传动器上作为液压油使用
·优异的抗燃性能
·超群的氧化及热稳定性,减少在系统内形成积垢
·良好的水解稳定性
·提供与高级矿物油相等的抗磨保护
·消泡、空气释放 抗乳化等物特都被严格控制於设备制造商规定的範围内
相容性
当选择结构及其它材料,例如密封元件时必须小心以确保与液压油相容。派路特HFD46与大多数的磷酸酯液相容。但是,建议在与其它磷酸酯液混合前先与美孚联系。

Product Descr1ption
Pyrotec HFD 46 is a high performance, fire resistant hydraulic fluid designed for use in electrohydraulic governor (EHG) control systems of steam turbines. It is a triaryl phosphate based on a selected xylenol distillate and is formulated to provide good oxidation stability.
Application
Pyrotec HFD 46 is designed for use in turbine governor systems including systems using fine tolerance servo valves. It is also recommended for use as fire resistant lubricant in steam and gas turbines, hydraulic systems requiring a fire-resistant fluid, such as foundrymachines,
forging hammers, smelting furnaces and other applications where there is a risk of fire.
Benefits
·Fully approved by Siemens TLV 9012 02 (issue 03/97)
for use as hydraulic fluid in electrohydraulic actuators
· Outstanding fire-resistance property
· Excellent oxidation and thermal stability reducing
residue formation in systems
·Good hydrolytic stability
· Provide protection against wear equivalent to that of
high grade mineral oils
·Physical properties, such as foaming , air release and
demulsibility, are carefully controlled within turbine
manufacturers’ specified limits.
Compatibility
Care must be taken in selecting construction and other materials such as seal components, to ensure compatibility with the fluid. Pyrotec HFD 46 is compatible with most other phosphate ester fluids. However, it is suggested to contact Mobil before mixing them.

Characteristics 特 性以 下 所 列 数 据 除 特 别 注 明 外, 均 为 典 型 值
Typical values unless otherwise stated

Mobil Pyrotec HFD 46
派路特 HFD 46

Viscosity 粘 度cSt @ 0 ℃@ 0 ℃ 厘 斯cSt @ 40 ℃
@ 40 ℃ 厘 斯cSt @ 100 ℃@100 ℃ 厘 斯

1700
43.4
5.0

Density @ 15 ℃,kg/L
密 度 @ 15 ℃, 千克 / 升

1.13

Pour Point, ℃
倾 点,℃

- 20
Neutralisation number, mg KOH/g
中和值, mg KOH/g
0.06
Chlorine content, ppm
氯含量, 百万份
25
Water Content, wt%
含水量, 重量%
0.06
Foaming at 24℃ 起泡性
Tendency 倾向, ml 毫升
Stability 稳定性, ml 毫升
30
Air release at 50℃, minute
空气释放性@50℃,分钟
1
Emulsion Characteristics, minute
乳化特性,分钟
1
Demulsification number,second
抗乳化值, 秒
165