简 介
美孚派路830乃采用精挑的高份子碳氢烃与酯类基础液小心平衡调配而成的全合成润滑油， 专用於在干燥炉之高温输送链条上。其出众之氧化稳定性已在广泛实际应用条件下得到证实， 较其他矿物油或固体链条润滑剂更能减少链条上积炭， 并延长链条清理周期。
优 点
·为链条及小齿轮提供高度磨损保护
·降低润滑油耗量
·降低用电量
·高温性能优异
·提高操作安全
用 途
美孚派路830可应用於干燥炉及拉幅机架上的高温输送链条。此类机器通常用于制造玻璃纤维、石棉度及碎料板的连续生产程序可应用于温度不高于230°C之链条。 润滑方法可用机喷法或手扫法。改用本产品时,须先将链条彻底清理， 以免旧有积炭影响润滑效果。喷射器喷咀亦须清理并加以调较,使润滑油能喷射於链条铆钉上。喷射数量亦要适度控制以防止产生积垢及减少耗油量。
特 性
·高温下只产生微量积炭
·容易流迸链条内， 磨擦力因而减少
·蒸发,损耗低
·无恶臭

Product Descr1ption
Mobil Pyrloube 830 is a fully synthetic lubricant based on a carefully balanced blend of high molecular weight hydr℃arbons and an ester based fluid. It has been developed for use on hot conveyor chain applications in drying ovens. Its outstanding oxidation stability has been demonstrated in extensive field service. Mobil Pyrolube 830 provides less coke formation and extended chain cleaning intervals compared to mineral oil and solid type chain lubricants.
Benefits
· High wear protection of chain and pinion
· Reduced lubricant consumption
· Reduced energy consumption
· Outstanding high temperature performance
· Improved operation safety
Application
Mobil Pyrolube 830 is suitable for the lubrication of hot conveyor chains in drying ovens and tenter frames. This equipment is commonly found in the manufacturing of glass fiber and r℃k wool mats and the continuous production of particleboards. The lubricant can be fed automatically to the chain by nozzle pipes or it can be applied by hand using a brush. Before changing to Mobil Pyrolube 830 the chain should be cleaned since deposits from the product previously in use could prevent proper lubrication. Application nozzles should also be free from deposits and properly positioned to deliver the product to the chain rivets. Lubricant feed rates must be monitored to prevent deposit formation and reduce consumption.
Properties
· Negligible deposit formation at high temperature
· Free flow and entry of the lubricant to the chain means less friction
· Low evaporation loss
· No unpleasant odor