简 介 本产品是新一代之重负荷循环油,专为满足美国 Morgan 厂所制造之高速线材轧严格要求配制而成。 优 点 · 适用于 Morgan 厂所制造用以轧制铁质及有色金属之高速线材轧机。亦适用于轧钢机之轴承系统 · 极佳之防磨及高负荷承受能力,能减少停机次数。即使为水份侵入亦能保持此等效能 · 无论机件是否浸於油中,仍能提供极佳之防锈保护,故此能使机件之寿命长久 · 能够与水份迅速分离 · 由于化学性稳定,故此可以延长油之使用寿命 · 润滑费用低廉 用 途 适用于 Morgan 厂制造之所有各种高速线材轧机循环系统,包括轴承、齿轮 , 调校螺杆,亦适用于轧钢机支承辊轴承循环系统。 性 质 · 抗乳化性良好,即使经长期使用后仍能与水份迅速分离 · 经实验室之齿轮及泵试验与及实际使用,证明即使油已混入水份仍能保持极佳之负重及抗磨性能 · 对於浸在油里的机件有极佳防锈保护效能 · 抗泡沫性能良好 · 有良好之氧化稳定性能,故此可以延长油之使用寿命 · 容易过滤
Product Descr1ption New generation heavy duty circulating oils.formulated to meet the critical requirements of No-Twist Rod Mills manufactured by Morgan Construction Company, Worcester, Mass, USA . Benefits · Can be used for both No-Twist Rod Mills, made by Morgan Construction Company for ferrous and non-ferrous metals and for rolling mill bearing systems · Less machine down time because of excellent wear protection and high load support, even in the presence of water Long Life of components, due to excellent rust protection provided, whether parts are oil immersed or not · Good separation from water Long charge life as result of good chemical stability · Low lubrication costs Application For all types of Morgan No-Twist Rod Mill circulation systems for bearings, gears, adjusting screws, and circulating systems for back-up roll bearings of rollingmills. Properties Good demulsibility for rapid separation of water,even after long periods of service · Excellent load carrying and anti-wear properties,even in the presence of water as demonstrated in laboratory gear and pump tests and confirmed in field performance Excellent rust protection for parts immersed in oil · Good protection from copper corrosion · Good resistance to foaming Good oxidation stability resulting in long charge life Good filterability
Characteristics 特 性 | 以 下 所 列 数 据 除 特 别 注 明 外, 均 为 典 型 值 Typical values unless otherwise stated | Density @ 15°C,kg/L 密度@15°C,千克/升 | 0.88 | 0.89 | 0.89 | 0.90 | 0.91 | 0.91 | Flash Point, ℃ 闪 火 点,℃ | 224 | 224 | 234 | 234 | 265 | 265 | Pour Point,℃ 顷点 ℃ | -12 | -12 | -12 | -12 | -12 | -4 | ISO Viscosity Grade 粘度等级 | 100 | 150 | 220 | 320 | 460 | 680 | Viscosity 粘 度 cSt @ 40℃ @ 40℃ 厘 斯 | 84.2/93.6 | 143/158 | 209/231 | 304/336 | 437/483 | 648/728 | cSt @ 100℃ @ 100℃ 厘 斯 | 10.7 | 14.6 | 19.2 | 24.0 | 30.7 | 35.2 | Viscosity Index 粘 度 指 数 | 95 | 95 | 95 | 95 | 95 | 80 | Color, ASTM ASTM 色度 | 3.5 | 4.0 | 4.5 | 5.0 | 5.0 | Dark Br. 深啡 | F.Z.G. Stages F.Z.G. 级数 | 12 | 4Ball Weld Load, Kg 4 球压试验,焊接负荷 | 160 | Demulsibility (ASTM D-1401)Emulsion min. to 3 ml. 抗乳化试验( ASTM D-1401 达到 3 ml, 分钟 | 20 | 20 | 20 | 20 | 20 | 20 | Copper Corrosion ASTM D-130 铜腐蚀试验 ASTM D-130 | 1b | 1b | 1b | 1b | 1b | 1b | ASTM D-665 Rust Test ASTM D-665 防锈试验 | Pass 通过 | Pass 通过 | Pass 通过 | Pass 通过 | Pass 通过 | Pass 通过 | Foam, ASTM D-892, I, 240C 泡沫试验 ASTM D-892, I, 24 0C | 0/0 | 0/0 | 0/0 | 0/0 | 0/0 | 0/0 |
|